Strength Shop Riot Squat Bar — 35mm, 25kg, Fully Knurled
The thickest shaft on this site at 35mm, and 25kg, fully knurled with a centre knurl and orientation rings. 230cm long on graphite-infused bronze bushings, recommended to 680kg.
That is not a photograph of this bar. Product photography on this page is illustrative. We are licensing real images of each bar and will swap them in per product as they arrive — until then the pictures show a generic unbranded bar of that type, not the product named beside them.
Published specification
Every figure below is Strength Shop’s own published specification for this bar, quoted rather than measured. Where a figure is not published it is not listed — there are no estimates in this table.
Who this bar is for
Serious squat specialisation. Strength Shop’s own explanation is the honest one — stiffness rises steeply with diameter, so the jump from 29mm to 35mm makes a real difference under a maximal bar.
What this page is not
It is not a review. Nobody at OlympicBars.co.uk has trained on this bar, so there is no score, no star rating and no verdict here, and there never will be unless that changes and we say so plainly. What this page gives you is Strength Shop’s own numbers, laid out the same way as every other bar on the site so you can compare them, and a link to the shop so you can check the current price yourself.
Other squat bars
32mm to 35mm and 25kg, fully knurled and deliberately stiff. The extra diameter keeps a heavy bar dead still across your back instead of oscillating.
Every figure is the manufacturer’s or retailer’s own published specification. An em dash (—) means they do not publish that figure — it is never a number we have guessed. “Tensile” is tensile strength in thousands of PSI. “Rotation” is bushings, needle bearings, or both in the same sleeve. No prices are listed here, deliberately: check the current price with the shop.
All squat bars →Compare it against everything else
All 52 bars on one page, grouped by type, on the same set of published figures.
The full tableNot sure what the numbers mean?
Tensile strength, whip, knurl depth, bushings against bearings — what each one changes when you are actually under the bar.
Specs explained